Atapi.sys

Windows IDE/ATAPI Port Driver

Atapi.sys version 6.0.6001.22193:

• 953689 A Windows Vista-based computer does not resume from hibernation (S4) or from standby (S3) if you run an application to set an RTC wake-up time Q953689 KB953689 x86 x64 IA-64

Atapi.sys version 6.0.6001.22191:

• 953834 The optical disc drive is intermittently not displayed on a ThinkPad X300 computer that is running Windows Vista Q953834 KB953834 x86 x64 IA-64

Atapi.sys version 6.0.6001.22190:

• 953533 A computer that is running an x86 version of Windows Vista or of Windows Server 2008 on an IDE/ATA disk does not generate a valid dump file when PAE mode is enabled Q953533 KB953533 x86

Atapi.sys version 6.0.6001.22159:

• 951663 When you restart a Windows Vista-based computer, the system does not send a restart notification to the ATA miniport driver Q951663 KB951663 x86 x64 IA-64

Atapi.sys version 6.0.6001.22134:

• 950186 When you connect an eSATA device to a computer that is running Windows Vista with SP1, the device does not work as expected Q950186 KB950186 x86 x64 IA-64

Atapi.sys version 6.0.6001.22130:

• 950096 When a SATA hard disk on a Windows Vista-based computer is operating in Parallel Advanced Technology Attachment (PATA) mode, the computer may crash Q950096 KB950096 x86 x64 IA-64

Atapi.sys version 6.0.6001.22107:

• 943170 A Windows Vista-based computer may crash when a SATA hard disk drive uses Parallel Advanced Technology Attachment (PATA) mode Q943170 KB943170 x86 x64

Atapi.sys version 6.0.6001.18034:

• 950186 When you connect an eSATA device to a computer that is running Windows Vista with SP1, the device does not work as expected Q950186 KB950186 x86 x64 IA-64

Atapi.sys version 6.0.6000.20847:

• 953689 A Windows Vista-based computer does not resume from hibernation (S4) or from standby (S3) if you run an application to set an RTC wake-up time Q953689 KB953689 x86 x64

Atapi.sys version 6.0.6000.20846:

• 953834 The optical disc drive is intermittently not displayed on a ThinkPad X300 computer that is running Windows Vista Q953834 KB953834 x86 x64

Atapi.sys version 6.0.6000.20845:

• 953533 A computer that is running an x86 version of Windows Vista or of Windows Server 2008 on an IDE/ATA disk does not generate a valid dump file when PAE mode is enabled Q953533 KB953533 x86

Atapi.sys version 6.0.6000.20815:

• 951663 When you restart a Windows Vista-based computer, the system does not send a restart notification to the ATA miniport driver Q951663 KB951663 x86 x64

Atapi.sys version 6.0.6000.20786:

• 950096 When a SATA hard disk on a Windows Vista-based computer is operating in Parallel Advanced Technology Attachment (PATA) mode, the computer may crash Q950096 KB950096 x86 x64

Atapi.sys version 6.0.6000.20765:

• 943170 A Windows Vista-based computer may crash when a SATA hard disk drive uses Parallel Advanced Technology Attachment (PATA) mode Q943170 KB943170 x86 x64

Atapi.sys version 6.0.6000.20757:

• 943899 An update that improves the performance, responsiveness, and reliability of Windows Vista is available Q943899 KB943899 x86 x64

Atapi.sys version 6.0.6000.20729:

• 943974 The "chkdsk /r" command and the "chkdsk /f" command take a long time to run on a Windows Vista-based computer Q943974 KB943974 x86 x64

Atapi.sys version 6.0.6000.20694:

• 941719 An IBM MicroDrive drive letter does not appear in the Disk Management node of the Computer Management console after you install the hotfix that is mentioned in Microsoft Knowledge Base article 932626 on a Windows Vista-based computer Q941719 KB941719 x86 x64

Atapi.sys version 6.0.6000.20693:

• 942524 Stop error message when you put a Windows Vista-based computer in hibernation: "STOP: 0x000000A0 (0x00000009, 0xc0000001, 0x00000001, 0x00000000) INTERNAL_POWER_ERROR (a0)" Q942524 KB942524 x86 x64

Atapi.sys version 6.0.6000.20658:

• 941311 An Ultra DMA Mode 5 transfer mode may be listed as an Ultra DMA Mode 2 transfer mode in Windows Vista Q941311 KB941311 x86 x64

Atapi.sys version 6.0.6000.20619:

• 938239 Error message on a Windows Vista-based computer that has a storage device inserted into a card bus adapter: "STOP: 0x00000050" Q938239 KB938239 x86 x64

Atapi.sys version 6.0.6000.20544:

• 933578 An Ultra DMA Mode 5 device may perform only at the speed of an Ultra DMA Mode 2 device after you swap devices in Windows Vista Q933578 KB933578 x86 x64

Atapi.sys version 6.0.6000.20541:

• 932626 Various problems may occur after you disconnect a PCMCIA storage device when a Windows Vista-based computer is asleep Q932626 KB932626 x86 x64

Atapi.sys version 6.0.6000.20523:

• 932079 Power consumption may be slightly more than expected on a portable Windows Vista-based computer that uses a SATA hard disk that does not support Host-Initiated Link Power Management Q932079 KB932079 x86 x64

Atapi.sys version 6.0.6000.20518:

• 931369 The Windows Vista installation process may take several hours on a system that uses an ATI SB600 Series chipset Q931369 KB931369 x86 x64

Atapi.sys version 6.0.6000.20514:

• 931263 Disk enumeration optimizations are disabled on certain Windows Vista-based computers that are using a hot swappable drive bay Q931263 KB931263 x86 x64

Atapi.sys version 6.0.6000.20509:

• 929909 A Windows Vista-based computer that uses a Mobile Intel 945GM Express Chipset may occasionally not wake from sleep Q929909 KB929909 x86 x64

Atapi.sys version 6.0.6000.20485:

• 928253 SATA optical drives are not available after you start a Windows Vista-based computer Q928253 KB928253 x86 x64

Atapi.sys version 6.0.6000.16632:

• 943899 An update that improves the performance, responsiveness, and reliability of Windows Vista is available Q943899 KB943899 x86 x64

Atapi.sys version 6.0.6000.16391:

• 928253 SATA optical drives are not available after you start a Windows Vista-based computer Q928253 KB928253 x86 x64

Atapi.sys version 5.2.3790.4053:

• 934794 A Windows Server 2003-based computer stops responding when you perform a surprise removal of an IDE device Q934794 KB934794 x86 x64 IA-64

Atapi.sys version 5.2.3790.4044:

• 934205 The ATA PASS THRU request is unsuccessful on a Windows XP-based computer or a Windows Server 2003-based computer Q934205 KB934205 x86 x64 IA-64

Atapi.sys version 5.2.3790.2911:

• 934794 A Windows Server 2003-based computer stops responding when you perform a surprise removal of an IDE device Q934794 KB934794 x86 x64 IA-64

Atapi.sys version 5.2.3790.2903:

• 934205 The ATA PASS THRU request is unsuccessful on a Windows XP-based computer or a Windows Server 2003-based computer Q934205 KB934205 x86 x64 IA-64

Atapi.sys version 5.2.3790.2721:

• 919168 An IDE device runs in PIO mode instead of in DMA mode after you update the firmware for the device in Windows Server 2003 Q919168 KB919168 x86 x64 IA-64

Atapi.sys version 5.1.2600.3112:

• 934205 The ATA PASS THRU request is unsuccessful on a Windows XP-based computer or a Windows Server 2003-based computer Q934205 KB934205 x86

Atapi.sys version 5.1.2600.2993:

• 924051 Disc recording software stops responding when you try to burn a disc on a Windows XP-based computer Q924051 KB924051 x86

Atapi.sys version 5.1.2600.2939:

• 920918 An IDE device runs in PIO mode instead of in DMA mode after you update the firmware for the device in Windows XP Q920918 KB920918 x86

Atapi.sys version 5.1.2600.1864:

• 920918 An IDE device runs in PIO mode instead of in DMA mode after you update the firmware for the device in Windows XP Q920918 KB920918 x86